Reducer Ceramic Hose
Reducer ceramic hose is a short piece of tubing typically used to connect the discharge port of a pump with pipes of different diameters. It can be either a concentric reducer, a conical hose on the same axis as the adjacent pipe, or an eccentric reducer with its flat side parallel to the connecting pipe.
Ceramic hoses are designed for applications with severe wet sliding wear and erosion that can quickly wear out conventional rubber mining hoses.
- Technical Parameter
- Dimensional data sheet
- Downloads
Brand: FENGCHI
Model: CH-R series
Nominal diameter: DN80~400
Hose length: customized
Pressure level: 0.1~5Mpa can be customized higher according to requirements
Temperature: rubber + ceramic -20℃~90℃
Connection method: flange, thread, etc.
Flange type: GB, ANSI, GOST, JIS, etc.
Additional options: branches, wear detection system (plug-in or push-button)
Lining: Wear-resistant, corrosion-resistant, high-temperature resistant rubber optional
Reinforcement material: Synthetic fabric and wire
Shell material: UV-resistant, ozone-resistant rubber
Connection material: carbon steel, stainless steel, etc.
| Size | Standard thickness | Max thickness | Standard pressure | Max pressure |
| DN | mm | mm | kpa | kpa |
| 80 | 4.5 | 4.5 | 1000 | 5000 |
| 100 | 4.5 | 6 | 1000 | 5000 |
| 125 | 4.5 | 6 | 1000 | 5000 |
| 150 | 4.5 | 6 | 1000 | 5000 |
| 200 | 4.5 | 12 | 1000 | 5000 |
| 250 | 4.5 | 12 | 1000 | 5000 |
| 300 | 4.5 | 12 | 1000 | 5000 |
| 350 | 4.5 | 12 | 1000 | 5000 |
| 400 | 4.5 | 12 | 1000 | 5000 |
※ Products are fully customizable, with non-standard specifications available upon request.
※ Standard hose thicknesses are recommended for general slurry applications.