Free Cut Mining Hose
Free Cut Mining Hose is a straight hard wall hose with an integrally constructed end connection. The other end of the hose can be plain or with a two-piece sleeve fitting.
This type of hose is used when the distance from pipe to pipe cannot be accurately measured. Mining hose can be cut to length on site and retrofitted into the pipeline with sleeve couplings. The pressure rating of the hose is based on the pressure rating of the sleeve fitting.
- Technical Parameter
- Dimensional data sheet
- Downloads
Brand: FENGCHI
Model: SH-F series
Nominal diameter: DN50~DN300
Hose length: up to 15m
Pressure level: 0~5Mpa can be customized higher according to requirements
Temperature: -20℃~90℃
Connection method: flange, thread
Flange type: GB, ANSI, GOST, JIS, etc.
Additional options: branches, wear detection system (plug-in or push-button)
Lining: Wear-resistant, corrosion-resistant, high-temperature resistant rubber optional
Reinforcement layer material: reinforced fiber cloth
Shell material: UV-resistant, ozone-resistant rubber
Connection material: carbon steel, stainless steel, etc.
| Size | Standard thickness | Max thickness | Standard pressure | Max pressure |
| DN | mm | mm | kpa | kpa |
| 50 | 6 | 6 | 1000 | 5000 |
| 80 | 6 | 9 | 1000 | 5000 |
| 100 | 6 | 12 | 1000 | 5000 |
| 125 | 6 | 12 | 1000 | 5000 |
| 150 | 6 | 12 | 1000 | 5000 |
| 200 | 6 | 12 | 1000 | 5000 |
| 250 | 9 | 15 | 1000 | 5000 |
| 300 | 9 | 19 | 1000 | 5000 |
※ Products are fully customizable, with non-standard specifications available upon request.
※ Standard hose thicknesses are recommended for general slurry applications.